sneg_mike 0 Posted January 17, 2014 Hey Guys Need help at first I thought it was the Cam and was going to buy a new one. From what I was reading up looks to be a power problem, I think, one of you guys will know right away. The cam goes from working fine to slowly color loss to flicking to black then come back on fine some time later. this has been happening for a while now, and Ive had enough of it thanks vid link Share this post Link to post Share on other sites
cctvmann 0 Posted January 17, 2014 I'd say the camera has a fault with the sensor chip I'd replace and see if it happens again you could also use a multimeter to check the voltage at the camera end to see if its fluctuating between voltages Share this post Link to post Share on other sites
shockwave199 0 Posted January 17, 2014 If you're using a power adapter it's easy enough to just put another one in line and see what happens. If you know you're using a good power supply and it still does it, it's most likely the camera. Share this post Link to post Share on other sites
sneg_mike 0 Posted January 17, 2014 thanks guys I will give both a try Share this post Link to post Share on other sites
