PoidaDaGrate 0 Posted January 17, 2014 Hi all 2 things: 1 - Documentation I am looking for the DM HDD replacement guide that was (in about 2008) available from one of the posters. I have managed to fdisk the g: drive on my (second hand) system... 2 - Help! History: Was given 2 DV-IP units from the school I teach at. HDD's had been removed before I got them. Installed 2 160G HDDs as they were the only matched size IDE drives I could find. They were formatted and seemed to work fine for a while, then the system stopped recording. Looking at the drives via PuTTY showed that they were full, so somewhere it remembered the original size, and collapsed in a heap when the smaller drives filled. Then came the noob mistake. Following the firmware upgrade instructions from the DM site I formatted the g: drive to update to the newest firmware, and now can get into the system with PuTTY, but cannot copy anything to the g: drive in order to update. I have tried FileZilla, WinSCP and PuTTY with all being unable to do anything. PuTTY message on opening: ********************************************************** * * WARNING>>> DV-IP Bootloader << * WEB Browser services not available, Script not available * IMAGES ARE NOT BEING RECORDED * ********************************************************** DV-IP> WinSCP errors: Error box containing "Error getting name of remote directory" and "Requested action not taken. IO error" (Buttons OK and Help) followed by another error box with the heading "Requested action not taken. IO error" and "Error listing directory ''." (Buttons OK, Reconnect and Help) FileZilla gives the following: Status: Connecting to 10.0.0.1:21... Status: Connection established, waiting for welcome message... Response: 220 ADH FTP SERVER READY TYPE HELP FOR HELP Command: USER dm Response: 331 User name okay, need password. Command: PASS ****** Response: 230 User logged in, proceed. Command: SYST Response: 215 ADH Type: 2.11 Command: FEAT Response: 502 Command not implemented. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 550 Requested action not taken. IO error Error: Failed to retrieve directory listing Any ideas? Cheers Pete Share this post Link to post Share on other sites
cathode 0 Posted January 18, 2014 You should use windows ftp client or the DM one to upload firmware install files. Share this post Link to post Share on other sites
PoidaDaGrate 0 Posted January 22, 2014 I did try ftp from windows, but DM actually give you FileZilla and PuTTY in their "PortableAppsToolkit" on their software page so I used them. The more I look at the issues the more confused I become. Now it only boots to engmode: and unless I give it a hard reset (pull the power) after a "reset" I end up with what looks like empty I: and G:, but both C: and D: are still there though. Also, it seems that only after a hard reset I can transfer files etc. Screen grab after a soft reset: ********************************************************** * * WARNING>>> DV-IP Bootloader << * WEB Browser services not available, Script not available * IMAGES ARE NOT BEING RECORDED * ********************************************************** DV-IP> dir i: dir i: Directory listing for Drive I: Path *.* 0 File(s) 80873625 MBytes free, 81022025 MBytes total DV-IP> dir g: dir g: Directory listing for Drive G: Path *.* 0 File(s) 80873625 MBytes free, 81022025 MBytes total DV-IP> dir c: dir c: Directory listing for Drive C: Path *.* LOGS . 0 DBASE . 0 VIDEO . 0 3 File(s) 2048 MBytes free, 152576 MBytes total DV-IP> dir d: dir d: Directory listing for Drive D: Path *.* VIDEO . 0 1 File(s) 2080 MBytes free, 152576 MBytes total DV-IP> Screen grab after a hard reset: ****** ********************************************************** * * BOOTLOADER * WEB Browser services not available, Script not available * IMAGES ARE NOT BEING RECORDED * ********************************************************** This engineering server will execute engineering and cofiguration commands There are limited line editing capabilities. If the command is not recognised, the server will list disk commands. The command parser will also respond to MCI commands. To exit type 'quit' or control D Type 'help' to list the Telnet commands Type '?' to list the disk commands Type 'EscM\help' to list the MCI commands DV-IP> dir i: dir i: Directory listing for Drive I: Path *.* TEST .TXT 0 26-09-2011 04:31 - test.txt FAVICON .ICO 318 31-08-2013 13:08 - favicon.ico ETC . 0 E2IPD .BIN 27654 21-01-2014 22:22 - E2IPD.bin REGISTRY. 88 21-01-2014 22:22 - registry BIN . 0 INDEX~1 .HTM 653 31-08-2013 13:12 - index.html README .TXT 2494 31-08-2013 13:12 - Readme.txt FRM_DATA. 0 FRMPAGES. 0 WEBPAGES. 0 DM2005~1.TXT 2208 31-08-2013 13:08 - DM2005_Upgrade_Instructions.txt BOOT~1 .BIN 1488816 21-01-2014 22:24 - BOOT.BINDONE PCAPPS . 0 COMMON . 0 BOOT~1 .BIB 1488816 06-09-2006 04:39 - BOOT.BIBDONE MAINM2IP.ZIP 2887470 21-01-2014 12:21 - mainm2ip.zip NOFORMAT. 8 19-01-2014 22:49 - noformat LOGS . 0 FILES . 0 20 File(s) 5030400 Bytes free, 62945280 Bytes total DV-IP> dir g: dir g: Directory listing for Drive G: Path *.* 0 File(s) 80873625 MBytes free, 81026470 MBytes total DV-IP> dir c: dir c: Directory listing for Drive C: Path *.* LOGS . 0 DBASE . 0 VIDEO . 0 3 File(s) 2048 MBytes free, 152576 MBytes total DV-IP> dir d: dir d: Directory listing for Drive D: Path *.* VIDEO . 0 1 File(s) 2080 MBytes free, 152576 MBytes total DV-IP> Any clues? I'm at a loss, and am almost ready to chuck it in the bin. Share this post Link to post Share on other sites
PoidaDaGrate 0 Posted January 22, 2014 and another 2 things.... 1. While all this is going on NetVu Observer sits with a message saying "Communicating with server.." then goes into it's "Connection timed out" mode. 2. Web interface just shows the message "Engineering Bootloader - No web server available" Both of these are to be expected when in engmode, which adds to my assumption that it is stuck in engmode. Aaaaaaaargh! Share this post Link to post Share on other sites
wackycctv 0 Posted May 6, 2014 Hi PoidaDaGrate, I have a DV-IP server, and may I know how you fixed this boot loader problem, we have same issue, and sometimes I observe network link became 10mbps.. Share this post Link to post Share on other sites