BassTeQ 0 Posted January 21, 2014 Hi all, I've had to mount some dome cameras vertically on a wall which causes the image to display upside down. I can flip the image vertically on the camera in the image settings page, but its still not correct it needs to also be flipped left to right, I don't see any way of doing this. Any ideas? Thanks Share this post Link to post Share on other sites
buellwinkle 0 Posted January 21, 2014 Without looking, I believe the option is center instead of flip. Share this post Link to post Share on other sites
BassTeQ 0 Posted January 21, 2014 Thanks will try this option out! Share this post Link to post Share on other sites
ssmith10pn 0 Posted January 21, 2014 Doesn't the imager on the camera rotate also? Share this post Link to post Share on other sites
MaxIcon 0 Posted January 21, 2014 Some cams call that option mirror. The imager doesn't rotate on 2 axis models, I believe, and not all of them will rotate a full 180 degrees from center. Share this post Link to post Share on other sites
BassTeQ 0 Posted January 22, 2014 Just posting a followup; that option does what I needed. Share this post Link to post Share on other sites
