ff17195757 0 Posted January 26, 2014 I would like to know if the DVR can be reformatted with an updated firmware ? if it is possible what would be the firmware for the attached unit and how to perform the upgrade without knowing the password. The model code on the board is 2308SE V1.02 The Serial number 2308ME 1008160161 No brand name no manufacturer made in China Video system NTSC/PAL Attachment: DVR photo.jpg DVR photo.jpg [ 1.21 KiB | Viewed 4 times ] Attachment: DVR board 2308se v1,02.jpg Share this post Link to post Share on other sites
varascope 0 Posted January 27, 2014 Most upgrades are: 1. USB with firmware loaded. Firmware loads on boot if it determines it is newer 2. Serial Port command line and Hyperterminal 3. FTP 4. GUI based with network or USB You don't know the manufacturer, but you have upgraded firmware????? If your not 100% sure what your doing or you have the wrong firmware, you could brick your unit. Share this post Link to post Share on other sites
aibudo 0 Posted January 27, 2014 Upgrading firmware doesn't reformat the hard-drive. I'm with the previous post. DON'T do anything with firmware unless you absolutely know that it's the right one. or that DVR will be junk. Even if the firmware is right, I've seen many DVR's junked with an attempted "upgrade"! Share this post Link to post Share on other sites
