Redistributing IP cameras between two NVR-s

[boge 0]

I have to redistribute IP cameras between two NVR-s (GV 900) while the operator is monitoring them from Control Center. Most probably I will have to do it without turning the system down previously.

I have some questions since I am rather new at this and so far have limited experience.

 

Do I have to delete first a camera in the NVR1 and then add it in the NVR2? What would happened if I try to add the camera without deleting it first in NVR1?

 

Will this redistributing the cameras affect in any way the Control Center and the Operator's monitoring?

 

Thanks!

[gb5102 0]

you can have the cam connected to both NVR simultaneously, no problem. I have done it numerous times

[boge 0]

That means that the control center will not be affected, at least not until I configure two new hosts for the Control Center.

 

Something else, since I will be adding a few cameras and move few also, i beliеve it is best to deactivate the watchdog function so I do not have problems with rebooting!?

 

Thanks for the answer!