bass1176 0 Posted February 11, 2014 I have this Monitor with a built in cam that I would like to turn on, I purchased an adapter for it which was 12v 5A, but noticed I was plugging it into an out rather then an in, and the in, had a four prong plug. It didnt turn on but was wondering whats the power out for and the same for the 4 prong plug which also is a power plug. Should I be connecting power to the 4 prong plug instead and is there an adapter from the normal looking DC v ( which is the one labeled out that I connected power to) to the four prong ( which says power in). Model number is m201sb which looks like an ADT product. Many thanks for any help on this. Share this post Link to post Share on other sites
varascope 0 Posted February 11, 2014 If you PM me with your email address I can send you the manual for this. 12VDC out is for external camera power. Share this post Link to post Share on other sites
bass1176 0 Posted February 11, 2014 Thanks a lot for your reply I just found the manual myself, it appears the monitor can only be turned on with a remote. Which I probably wont be able to find. Iam better off getting an entire replacement unless someone has experience with these to get them going. The ac adapter and remote, seem to be what Im missing. I plugged in the power into the OUT, cant imagine why they would make the power in, into a 4 prongs plug. Its the first link in this search if anyone is interested. Any recommended replacements? Then again dont want to make a new purchase over the right adapter and a remote, probably much cheaper then a new unit. https://www.google.com/#q=m201sb Share this post Link to post Share on other sites
