Problem in Dahua NVR5232 32 Channels

[IP Engineer 0]

Dear Guys,

 

I have installed IP Cameras (IPC-2100P) Dahua brand & connect with NVR 5232 (32 Channels) 22 cameras, While 19 cameras has been added easily, While on adding other 3 cameras NVR gives error "Beyond the decode ability of device!Please close channel: 20,21,22.

 

Please help me out how to overcome on this problem..

[tomcctv 190]

Hi. Set at least 8 of your cameras to D1 then it will allow you to add 32 cameras

[luckyfella 0]

Lower the bit rate to 2048 on every channel.

[Securame 0]

What are the settings on each of those cameras? Resolution and max bitrate?

 

I think NVR5232 should be able to support 32pc HFW2100 (1.3Mp)...

[luckyfella 0]

You can have them all set at 1.3mp but keep the bit rates down. That's what that mssg means.