wildchild 0 Posted February 14, 2014 hay there. new to forum. i have a question i had a millwakee m12 spector digital inspection camera it got run over on a job the camera itself is fine iam making my own inspection camera using the camera but i need to know how to wire it what do i hook the wires to theres 2 black wires 1 red 1 white 1 green also the head of the camera has a lite with low med high so please tell me how to hook this thing up thanks Share this post Link to post Share on other sites
jjp2014 0 Posted February 14, 2014 Do you have the parts from the handle? if so post pics of the camera end and the handle end ... I can certify that there is a ground, a Positive power lead to light ... A ground and video return ... colors can change per manufacturer... Service manual: http://www.milwaukeetool.com/instruments/inspection-and-detection/2310-21 http://www.google.co.in/patents/US20090225159 Basically there is a 9 pin din connector that routes the wire from camera cable to PCB board in the handle.. the handle has approx 4mb of on board RAM and runs a DSP processor... long story short not easy.... Share this post Link to post Share on other sites
wildchild 0 Posted February 14, 2014 Do you have the parts from the handle? if so post pics of the camera end and the handle end ... I can certify that there is a ground, a Positive power lead to light ... A ground and video return ... colors can change per manufacturer... Service manual: http://www.milwaukeetool.com/instruments/inspection-and-detection/2310-21 http://www.google.co.in/patents/US20090225159 Basically there is a 9 pin din connector that routes the wire from camera cable to PCB board in the handle.. the handle has approx 4mb of on board RAM and runs a DSP processor... long story short not easy.... so all i have is the wip that camera is on thats all i have black ground white red green thats it thanks for ur help Share this post Link to post Share on other sites
