Jump to content
mike747

Jaggerd images on ic realtime app

Recommended Posts

Hi, need some help please.

Have a IC Realtime ip cctv system that I installed at my office.

It has two ICIP-DIR1300 ip cameras connected to a Breeze 2TB

NVR box. All is good when viewing direct on the NVR and the connected monitor, but when viewing remotely via the

ICRSS PRO app for iPhone or iPad, the image has jaggerd edges,

Like along the straight lines of the camera view. See attached photo taken on the app. Is this normal? Or can I adjust things in the settings to make this look a lot clearer remotely.

image.jpg.a580e770aff8c4c2d9e45a1f1c1765c3.jpg

Share this post


Link to post
Share on other sites

Are you connecting main stream or sub-stream?

 

Considering you probably paid 3-4 times for a Dahua system by going through IC Realtime, they are not offering support?

 

Try downloading iDMSS in the apple store and see if you get the same result.

Share this post


Link to post
Share on other sites

Mike,

 

The camera seems to be analog one. It is supposed to output TV signal which is interlaced video. To remove the jagged artifacts, it should be capable of doing de-interlacing (making progressive) before compressing into bit streams for remote access.

The chip may not be designed to do such a mild de-interlacing job.

But you can be put up with.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×