dvr Dead help

[eli7897 0]

i am update dvr and dvr not up

 

i need flash

 

 

Device Name EDVR

Device ID 0

Video Format PAL

Hardware Version 160.12.16.Q1-V1.2-td20a

MCU Version ---

Kernel Version C9K7-D3B3-D79B

Firmware Version 3.3.0.P-3520A-13

Launch Date 2013-09-12

 

 

this my dvr

thanks

[aibudo 0]

What make and model number? What about posting a picture, front, back, bottom and of the carton it came in?

[eli7897 0]

i am think model 2304ss

 

but ths box vs 246

 

and pic look

 

 

[eli7897 0]

help

 

?????????????????????????????????

[aibudo 0]

I have never seen that DVR before. Is it dead? What does it do when you try to power it up? Why do you think you need the "flash"?

[eli7897 0]

Because I did flash the device stuck at splash screen H.264

 

i am think i need flash to 3.3.0p

 

td2316ss or 2304ss

[aibudo 0]

Ok, I'm out of here. An improper firmware upgrade can "kill" the DVR. Won't be able to help, since you have already tried an upgrade.

[milkisbad 0]

That's a 2316ss-c (16 for 16 channels)

 

http://www.ltsecurityinc.com/en_us/product/1097.html

 

you'll see the kernel and firmware under downloads.

 

look under machine for exact model number and find it at LTS 's website.

[eli7897 0]

thank you

 

but not work

idon't know

 

[tomcctv 190]

thank you

 

but not work

idon't know

 

 

 

Like already said once flashed wrong that's it

 

Are you pal for your area ?

[eli7897 0]

i need europe

[milkisbad 0]

Hi Eli,

 

Did you read the instructions on how to do the flash?

 

1. download the file

2. extract the files

3. you'll see a 'flash' folder, the flash files are in there.

4. go into the folder and copy the 3 individual files

5. paste it into a EMPTY USB (with no files other than the flash files) flash drive that is around 8-16 gb.

6. turn off your DVR, plug USB drive in

7. turn the machine back on, and if it works, you should see a black screen for about 10 mins, then the machine will restart and you should be ok.

 

from experience even if you got the wrong files it doesn't hurt the machine (for these models) you'll just see the H.264 screen if it doesn't work.

 

you'll know its working if you see the flash drive blinking like crazy and black screen when you start up. IF you see h.264 screen but USB drive blinks, give it like 15 mins maybe its working.

[eli7897 0]

yes i am make instructions

but not work

 

i am only screen h.264

 

yes the disk flash work

i am wait 15 min buy Nothing i try again

this very Strange

[milkisbad 0]

Is there a harddrive inside? I would disconnect it first and see if its the Hard drive causing the problem.

 

If you remove the covering, you will see a sticker with the exact model number on the motherboard, the firmware I linked you might just be a similar machine but not the same. If you can take a picture of the motherboard maybe we can find a correct one for you.

[eli7897 0]

no not have inside hardisk

 

i am Photograph the motherboard

 

 

 

[milkisbad 0]

hmm I would either RMA the machine or get the proper regional flash files from your vendor (the company i linked you is in the US) then try again with PAL flash files (But not sure if there is a big difference) .

[eli7897 0]

you have for me maybe?

 

Maybe that scalded the wrong version so screwed?

 

 

this very Strange

[eli7897 0]

??????????????????????

[eli7897 0]

?????????????????????

[eli7897 0]

help me!?!?!??

[okay1 0]

Hi every one

I need flash file for this type of dvr

thank you in advance

[arka 0]

Hi,

I need help to find firmware for my dead dvr with this parameters

 

Hardware Version 180.0.22.Q9-DKABI-td20d

Kernel Version D6L3-D8L3

Firmware Version 3.3.0.P-3520D-00

 

Thanks for help.

[dvrdydns 0]

Hello, I'm in need of help

[dvrdydns 0]

3 minutes ago, dvrdydns said:

Olá, estou precisando de ajuda

 

[dvrdydns 0]

premier real time high resolution dvr please wait