sabbsj 0 Posted March 5, 2014 I am having an issue with an installation, wondering if anyone has tried a solution that I was thinking of implementing. Camera setup: Progressive scan RGB CMOS 1/4” ccd (axis p-1343) Lens Currently Installed : Format Size : 1/3" , Focal Length: 7.5-50mm, Aperature Ratio: 1:1.4 , CS mount , DC Iris I am unable to do a back focus on the camera as there isn't enough flange focal distance adjustment to back focus the lens. I am wondering if anyone has ever used a C-CS extension (5mm) and seen positive results in similar circumstances? Share this post Link to post Share on other sites
the toss 0 Posted March 5, 2014 I am having an issue with an installation, wondering if anyone has tried a solution that I was thinking of implementing. Camera setup: Progressive scan RGB CMOS 1/4” ccd (axis p-1343) Lens Currently Installed : Format Size : 1/3" , Focal Length: 7.5-50mm, Aperature Ratio: 1:1.4 , CS mount , DC Iris I am unable to do a back focus on the camera as there isn't enough flange focal distance adjustment to back focus the lens. I am wondering if anyone has ever used a C-CS extension (5mm) and seen positive results in similar circumstances? Are you using a NDF to force the iris open when you attempt to backfocus ? Share this post Link to post Share on other sites
sabbsj 0 Posted March 10, 2014 Yes I have tried both a NDF and doing the process at night. I found better results with the NDF. Share this post Link to post Share on other sites