victorb 0 Posted March 12, 2014 I bought an outdoor wireless security camera with I/O connections. I also have a magnetic door sensor. I want to wire the door connector to the camera so that the camera will take a picture each time the door is opned. Can anyone help me with how to wire this. I have looked everywwhere and I cannot find instructions on how to do this. Hre are some pictures. Share this post Link to post Share on other sites
jjp2014 0 Posted March 12, 2014 Make and model of the camera? Share this post Link to post Share on other sites
victorb 0 Posted March 12, 2014 Never mind. I played around with it enough to figure it out. Pins 3 & 4 on the I/O bus were the right ones and COM and either NC or NO worked on the sensor. The NC connection is for an alarm trigger on Close and NO is for an Alarm trigger on Open. I wrote the instructions for the Sensor in a single sentence. You would think the manufacturer could send along a little note to tell you that. Geez! Now I just need to find out what type of female pin connectors that fit the I/O bus on the camera. Any Ideas? Share this post Link to post Share on other sites
Securame 0 Posted March 12, 2014 Hey, that is awesome! I did not even know there were magnetic sensors with NO/NC connectors. Must find them, thanks for that pic! Share this post Link to post Share on other sites
victorb 0 Posted March 12, 2014 Hey, that is awesome! I did not even know there were magnetic sensors with NO/NC connectors. Must find them, thanks for that pic! I bought it off Amazon.com. Here is the link. http://www.amazon.com/gp/product/B0009SUF08/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 Share this post Link to post Share on other sites
