earth12u 0 Posted March 18, 2014 Hi, hopefully I'm in the correct forum. We've just bought a Sunluxy H.264 4CH Kit, model UJ1311 and are currently only using 2 of the channels. Channel 1 plays back at normal speed. The other camera, whether on channel 2 or 3 (not tried 4!), plays back at about twice the normal playback speed and we've done everything to try and slow it down but it won't. We've clicked every button and repeatedly, with mouse and remote. All the channels are set to motion recording, with encode settings, video only, D1, highest quality, main stream, bitrate mode constant, constant rate 2Mbps, and 25fps, all identical settings. I tried using the sub stream setting for channel 2 but that didn't work either. The only time that channel 2 (or 3) plays back at normal speed is when I play back channel 1 at the same time but then it's no good because they record motion and therefore the one which records less keeps stopping until the timer catches up. Not sure whether to send it back or whether it's just some setting which is wrong. Hopefully one of you may have an answer (a polite one!) Share this post Link to post Share on other sites
