Sheikmans 0 Posted April 7, 2014 (edited) First of all I made a stupid mistake, I hope you can help me. The PoE connector (female) was too big and didn't fit through the wall. So I cut off the connector from the networkcable (see attached picture) to replace it by a standard RJ45 connector. To my surprise there are 8 wires but not typical colored. I have no idea what the color code/pinout is for this camera. I will not use PoE, but the 12V power supply adaptor instead. This url to the picture of the cable I cut.Colors are: https://app.box.com/s/u76vf80jc723x95dlqyr Brown Black Blue Red White Green Yellow Orange Can someone help me please? Thank you very much!! I don't think i can use a meter, because I messed with the PoE ejector.. Edited April 7, 2014 by Guest Share this post Link to post Share on other sites
ssnapier 0 Posted April 7, 2014 Just use a multi-meter and ohm out each pin to it's corresponding wire. Share this post Link to post Share on other sites
Sheikmans 0 Posted April 9, 2014 Reply from AVTech: 1 Green 2 White 3 Orange 4 Brown 5 Red 6 Yellow 7 Black 8 Blue Share this post Link to post Share on other sites
