smcctv 0 Posted April 7, 2014 Hi all, Could anybody assist with the below: I spoke with technical team who supply the equipment, earlier today. I currently have setup a x3 ip camera to a 4 channel 4POE NVR unit. The 1.3mp camera work fine set on Main Stream but the 2mp ip camera does not. When i change it to Extra Stream it works. So i changed it back to Main Stream and i noticed that the time had frozen. I logged in remotely and turned off the 2 1.3mp camera to check if there is a bandwidth issue. But the one 2mp camera still does not work on Main Stream mode. Does this make sense, can anyone advice? Many Thanks Share this post Link to post Share on other sites
dexterash 0 Posted April 8, 2014 What models/units are you using? Share this post Link to post Share on other sites
smcctv 0 Posted April 8, 2014 Hi, The company have said its a fault in the firmware and that they are going to update this for me remotely on Thursday. Many thanks for your reply. Share this post Link to post Share on other sites
