atcsam 0 Posted April 8, 2014 1st time post, long time viewer, some great info and experts on this forum. Debating on Samsung SRN-470D or Dahua NVR 5216. System: Samsung 7082 & 1080R Bosch NDN 832 IVA enabled (I like this one) Grandstream 3672_FHD Cisco CE 500 24PC Budget cuts have reduced my 8-10 camera system to 4 for the next 6m-1yr.. 2 3MP at 20fps, 15fps respectively 1 2M 1080P FHD 30 FPS 1 VGA I figure 3TB for 7 days 24/7 more if motion/ alarm recording. I'm still awaiting a response from Dahua for the ONVIF capabilities for the specific models. I can set up a refurbed 470D for the price of the 5216, just limited to 4 cameras. The 5216 would allow expansion whereas the 470D is a fixed solution. Any thoughts or alternatives appreciated Share this post Link to post Share on other sites
buellwinkle 0 Posted April 8, 2014 Camera manufacturer NVRs are probably not a good idea if you have a mix of camera brands. Either go with a generic NVR like NUUO or go with software like Milestone, Exacq, etc. Share this post Link to post Share on other sites
atcsam 0 Posted April 8, 2014 Thanks, I'll revisit the PC/ software route again. Budget cuts have me back down to $1K or less for the NVR route. I have about $700 tied up in the current collection, mostly NOS. Going for a upper end, low budget system. I was hoping to exploit the ONVIF capabilities of the NVRs, I'm fairly certain I can at least record the rtsp streams directly, just not sure of the motion/alarm. Cameras are 2.0 or above and I can record the analytics on the edge as required. Sammys latest firmware supports ONVIF M.D/V.A events, I leaning towards it for a standalone solution... I'd prefer to get the NVR5216 to play for future growth. Anyone with experience with using ONVIF with the Dahua NVR5216? Share this post Link to post Share on other sites
MaxIcon 0 Posted April 8, 2014 Blue Iris would support 8 or more 3MP cams on a $600-700 pc, depending on the frame rate. It's very powerful and flexible, but uses a good bit of CPU at high frame rates with MP cams. There's a demo version you can test to see if it fits your needs. Share this post Link to post Share on other sites