carcol_123 0 Posted April 14, 2014 I purchased this camera from Ebay, I placed a bid and it came to me that it might be a IP camera and 3 hours from the end Ebay would not allow me to retract my bid, my first thought was to relist it.With your help, if I get a conversion lead and connect to my recorder will I get a picture Share this post Link to post Share on other sites
myiicu 0 Posted April 14, 2014 Some IP cameras have a test/service connector or bnc connector at the rear. This test/service connector allows the installer to view the IP camera for aim/focus etc. The signal output is standard analog video. Share this post Link to post Share on other sites
carcol_123 0 Posted April 17, 2014 I have this Panasonic WV-CP220/b camera which has no night vision to talk about, this forum suggested an illuminator, so I purchased a 48 LED illuminator and still I do not get any night vision pictures you can see the illuminator is red in the dark, has anybody any ideas, if not I will give up on this camera. Once again thanks to all of you for your help so far. Colin Share this post Link to post Share on other sites
myiicu 0 Posted April 17, 2014 Does the Panasonic WV-CP220 change from color to black and white in low light? The camera needs to be in black and white mode in order to see any IR. If camera stays in color mode, you have a problem with the cut filter... Share this post Link to post Share on other sites
