sgwellinc 0 Posted May 3, 2014 Hello, Just recently purchased a Q-See QT5682 DVR system...I tried connecting the video out from DVR to Composite Video on my 24" LED TV (Yellow) using a BNC cable and adding a RCA adapter to TV end. But I am not receiving any signal. Am I doing something wrong? Please Help Share this post Link to post Share on other sites
myiicu 0 Posted May 4, 2014 Is your TV set to AV input or composite input using your tv remote control? Share this post Link to post Share on other sites
sgwellinc 0 Posted May 4, 2014 Yes, it is... Whats weird is that when i connect the hdmi and bnc cable together to the TV, i can see the display on both hdmi input and AV/ input. Once I unplug the hdmi the signal is loss on the AV input. I even tested the rg59 cable to a camera to see if it works. Share this post Link to post Share on other sites
myiicu 0 Posted May 4, 2014 Connect a cctv camera directly into your tv a/v input to confirm that the input works properly. Also, use a meter to test the bnc to rca adapter. Share this post Link to post Share on other sites
