Hikvision Mini Dome Fail

[carrot 0]

Hello Installers,

 

I need some help.

 

We purchased some Mini Domes from Hikvision (DS-2CD2532F-I)

 

Unfortunately I am having trouble organizing the cables since it has no enclosure to hide it in.

 

Does anyone have a idea how I could hide the cable to make it less visible?

I am mounting onto concrete roof.

 

Thanks

[what-da 0]

Have a look at this one http://www.ezcctvonline.com/hikvision/ds-1282zj-dmmini-hikvision-ezcctv-?sort=p.model&order=DESC&page=6

[carrot 0]

Hi

 

Thanks for your reply

 

I do have such a mount, but it is too small to hide cable in, I need to dangle cable next to camera, where it goes into Junction box.

 

Does not help if dome is MINI or Vandal when I have wires hanging loose...

 

Other option is to put camera on JB, but then it looks much less appealing.

 

I wish there was some minimalist JB that I could buy for cameras.

 

looks im out of luck

[buellwinkle 0]

While Hikvision makes extender plates for some of it's cameras and we use them for the ds-2cd2732f when mounted on concrete wall, unfortunately, they do not make it for that camera. The only Hikvision solution is the DS-1272ZJ-120 wall mount. Any place that sells Hikvision should be able to get you that mount.

 

[marley1 0]

couldn't you mount a plastic enclosure behind it and screw the camera to it? Or can you drill a bigger hole in the cement and put the female coupler in the wall and mount camera over hole?