Poenskop 0 Posted May 8, 2014 I have a DVR that was made in 2010. The DVR beeps, then restarts randomly and intermittently by itself. I have checked and it is not that my harddrive is full. Once it restarts I cannot use the front panel or remote to control it. Sometimes it works, where I can control it and the boot-up has no problems. What could be causing this issue? Share this post Link to post Share on other sites
cctvmann 0 Posted May 8, 2014 I have a DVR that was made in 2010. The DVR beeps, then restarts randomly and intermittently by itself. I have checked and it is not that my harddrive is full. Once it restarts I cannot use the front panel or remote to control it. Sometimes it works, where I can control it and the boot-up has no problems. What could be causing this issue? it could be a power supply not supplying enough current to the machine either try a new power unit or Share this post Link to post Share on other sites
buster74985 0 Posted May 12, 2014 Have you checked to make sure the "auto maintain" feature is not enabled? This is a feature on Dahua and rebranded Dahua NVRs. I have a DVR that was made in 2010. The DVR beeps, then restarts randomly and intermittently by itself. I have checked and it is not that my harddrive is full. Once it restarts I cannot use the front panel or remote to control it. Sometimes it works, where I can control it and the boot-up has no problems. What could be causing this issue? Share this post Link to post Share on other sites
vin2install 0 Posted May 12, 2014 It could be the hard drive. Try disconnections the hard drive and let it run to see if it still restarts. Share this post Link to post Share on other sites
