Geovision 1480 displaying more than 32 cameras?

[RichTJ99 0]

Hi,

 

I have a 1480 card with the latest geo software. I also have 12 analog & 19 IP cameras. If I wanted to add another 5 cameras, what are my options?

 

Thanks,

Rich

[PA2001 0]

Hi,

 

I have a 1480 card with the latest geo software. I also have 12 analog & 19 IP cameras. If I wanted to add another 5 cameras, what are my options?

 

Thanks,

Rich

 

Did you ever get a solution to this problem? Running in to the same thing.

[RichTJ99 0]

Hi,

 

I did, i bought a geovision control center USB which allows for the matrix & basically i setup another PC with the Geovision NVR, then ran the matrix software which allows you to view multiple geovision setups in a single window.

 

It works great but is a little bulky considering most of my cameras are IP based.

 

Thanks,

Rich

[PA2001 0]

Hi,

 

I did, i bought a geovision control center USB which allows for the matrix & basically i setup another PC with the Geovision NVR, then ran the matrix software which allows you to view multiple geovision setups in a single window.

 

It works great but is a little bulky considering most of my cameras are IP based.

 

Thanks,

Rich

 

 

Is this what you bought?

 

GV-Control Center software

http://www.geovision.com.tw/english/Prod_GVCCSV3.asp

 

or this:

 

GV-Center V2 Pro

http://www.geovision.com.tw/english/Prod_GVCV2P.asp

 

or this:

 

GV-Center V2

http://www.geovision.com.tw/english/Prod_GVCV2.asp

 

Thanks

Paul

[RichTJ99 0]

So, I bought this: 55-CTRLC-000 Geovision Control Center Software for Multiple Remote Geovision System Control - Qty:1

 

I had my original GV server with a 1480 card. I maxed out at 32. I then had a spare PC, I installed NVR on it, then I installed the control center software.

 

I plugged my spare PC (with the control center software) into the TV & ran the Matrix program (part of the software) which has the standard GV view we love but goes up to many more cameras than I will need (64, or 128). Then it allows multiple matrix windows that will cycle so you could monitor more cameras than I could think of.

[PA2001 0]

Thanks for all the details. That took care of all the other questions I had too!

[RichTJ99 0]

Not a problem, let me know if I can be of any other help.

 

Of course there is this thread:

 

viewtopic.php?f=36&t=42919

 

That would take care of it too. I might switch over to the 1 system again in the future. Having two came in handy today though!