zgebis 0 Posted May 18, 2014 So we have a few of the Q-see QD6504B ($199.99 Retail). The quality SUCKS. Whats the deal is there some setting I need to mess with in the camera OSD. http://www.q-seestore.com/weatherproof-650-tvl-bullet-ccd-camera-with-150-ft-night-vision-qd6504b/ I have it recording a 960H Highest Quality 4FPS we have 9 of these things and they all function equally bad. Share this post Link to post Share on other sites
Numb-nuts 1 Posted May 19, 2014 Buy a ready made kit and the best you can hope for is a COMPROMISE. SPREAD THE WORD PLEASE! The DVR will only display and record what you send to it. UNLESS... Hw are you connection your DVR to your diplay? VGA, HDMI, BNC? OSDs do often have a sharpness setting, doesn't usually solve this sort of issue but it's worth a try Share this post Link to post Share on other sites
milkisbad 0 Posted May 19, 2014 I hope you didn't pay $199 for it...$199 can get you a good 3mp Hikvision IP camera. The angle looks wider than the 4.6mm they advertise it as. (looks like almost 90 deg angle, roughly a 2.8mm lens) Wider angle means your pixels will be more spread out and leading to blurry pictures. Is it varifocal? Share this post Link to post Share on other sites
tomcctv 190 Posted May 19, 2014 I have it recording a 960H Highest Quality 4FPS we have 9 of these things and they all function equally bad. Hi. You can't set dvr to 960H while just having standard none 960 cameras. Try lower settings and get dvr up to around 7 to 10 fps Share this post Link to post Share on other sites
zgebis 0 Posted May 19, 2014 So i went ahead an broke the cameras open and to my surprise they were NOT focused correctly. So doing that times 9 cameras is a hassle but worth it. According to DPSI they are a 960H camera, I dont believe it. I didnt pay a penny for them. I got it as a free upgrade from DPSI because the original system I was sold Failed so bad I didnt even want to bother backing up video of a theft because you couldn't make out anything. I was offered an HD system and said no because I did not want to rewire. I still think it should be at least a bit clearer. Share this post Link to post Share on other sites
shockwave199 0 Posted May 20, 2014 Huh. Well pics of the focused cameras would be good to look at- post some please. Share this post Link to post Share on other sites
joseph.chen0312 0 Posted June 13, 2014 The image shows up it seems over brightness. It means not well programmed at parameter. Share this post Link to post Share on other sites
