[solved] hikvision pcnvr live view not working

[redsleeve 0]

Hi,

 

I managed to set pcnvr with one camera for now. It works locally on lan, but live view does not work remotely. I select substream and live view always fails.

Do I need to forward some other ports? I only did port 80 so far, so that I can access pcnvr obviously

 

EDIT:

 

Apparently I need to have all three ports forwarded. 80, 554 and 8000. 8000 is port for "viewing".

They could add that to pcnvr user manual, but ok. I eventually found under network settings all three ports used by pcnvr..

Edited May 23, 2014 by Guest

[Securame 0]

80 is for the web interface, you need to forward RTSP port for video streaming (554 by default).

[redsleeve 0]

80 is for the web interface, you need to forward RTSP port for video streaming (554 by default).

 

I did 554 to, but didnt work (maybe because it tried main stream and my uplink is too slow for main stream). Port 8000 seems to fix issue in web interface.

[rrrikin 0]

Hey I am having similar issue with PCNVR. I have forwarded following ports 554, 8000, 443 and 80 and still cannot access live video/playback from outside world network. Any suggestions would be really appreciated.

 

Thank you

 

PS nvm it was port 8000 wasn't forwarding properly now it works fine! Thanks anyway

 

Hi,

 

I managed to set pcnvr with one camera for now. It works locally on lan, but live view does not work remotely. I select substream and live view always fails.

Do I need to forward some other ports? I only did port 80 so far, so that I can access pcnvr obviously

 

EDIT:

 

Apparently I need to have all three ports forwarded. 80, 554 and 8000. 8000 is port for "viewing".

They could add that to pcnvr user manual, but ok. I eventually found under network settings all three ports used by pcnvr..