osama84 0 Posted June 3, 2014 if you can connect to the LAN Camera HIKVISION POE (no power supply 12v)? What I do upgrade the firmware or reset the device! I'm not going to climb up the ladder and pull the camera from a height 5meters CAMERA HIKVISION ------ LAN RJ45 ---- ??? must by 12v? Share this post Link to post Share on other sites
abdelm01 0 Posted September 15, 2014 Not really sure what you are trying to ask, can you be a little more specific and clearer please!! not sure if you are asking if the camera takes 12V or what. What are you exactly trying to do? Share this post Link to post Share on other sites
thebeaverrj 0 Posted September 15, 2014 Sounds like he wants to perform TFTP reset without accessing the camera - ie. powering it over PoE rather than attaching 12V supply. I've only ever performed TFTP via 12V / direct to PC. Not tried with PoE switch before Share this post Link to post Share on other sites
abdelm01 0 Posted September 15, 2014 If you are trying to do a firmware upgrade you can keep it on poe and it will not have any issues when restarting and it will not kick off the poe power from the camera so you should be ok to do it Share this post Link to post Share on other sites
