Jump to content
Sign in to follow this  
floridagatormike

Dahua 16ch NVR advice

Recommended Posts

I am putting a new security system in my house. I would like 16ch 1080p and after doing some research, I saw some recommendations for this setup:

 

NVR5216-P 16 Channel 1080p+ 5 Megapixel 1U NVR POE

HFW2100 1.3 Megapixel 720p Bullet IP Camera

HDB3200C 2.0 Megapixel 1080p Mini Dome IP Camera

 

My questions are:

 

1. Does this look like a reliable, reasonably-priced setup to use in my house?

2. If not, does anyone have any other suggestions?

3. I notice that the number of NVR channels does not always equal the number of POE ports. Does this mean I can put multiple cameras on a single port? Is there some kind of splitter I would need?

 

Any advice would be helpful! Thanks!

Share this post


Link to post
Share on other sites

It pains me greatly to help a gator fan... you have no idea (FSU!!!).

 

I generally do not use the POE source from an NVR, I have had issues in the past with reliability so now I just bypass them by default. I usually get my own POE switch or POE mid-span depending on the situation and use that as the power source so that all the NVR has to do is process the data. A decent 8 port POE switch is typically in the $150-200 range, and the brands are all over the place but Netgear, D-Link, Zyxel, and TP-Link are typically worth the loot. Oh I forgot about Cisco, but in all cases make sure you are buying one with a full 8 ports of POE, there are lots of cases where they will have 4 with POE and 4 standard ports.

 

You also do NOT need to worry about getting a gigabit switch unless you get over 8 cameras.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×