littlbox 0 Posted June 6, 2014 I am having a hard time understanding the specs of these dvrs.I cant find out what is the recording resolution for the ip cameras.I want to use 4 analog and a 3mpixel hikvision ipc.I want to record the ipc in its full resolution but every hikvision reseller ,I asked, doesnt know what is the ipc recording resolution., also the specs on the hikvision site dont help much -the analog rec. resolution is mentioned only. the hybrids in question are ds-7604hi-st,ds-7608hi-st and ds-7616hi-st. please help Share this post Link to post Share on other sites
littlbox 0 Posted June 12, 2014 Anyone?I cant believe that no one here has ever used a hybrid dvr from hikvision. Share this post Link to post Share on other sites
noname 0 Posted June 12, 2014 I am having a hard time understanding the specs of these dvrs.I cant find out what is the recording resolution for the ip cameras.I want to use 4 analog and a 3mpixel hikvision ipc.I want to record the ipc in its full resolution but every hikvision reseller ,I asked, doesnt know what is the ipc recording resolution., also the specs on the hikvision site dont help much -the analog rec. resolution is mentioned only.the hybrids in question are ds-7604hi-st,ds-7608hi-st and ds-7616hi-st. please help http://www.hikvision.com/UploadFile/image/2013101614595424780.pdf pretty sure it is stated in the spec above. DS-7604HI-ST would be ok for you it has 4 analog input. And for IP, it can record up to 5MP. Incoming bandwidth is 20mbps, should that should be more than enough for one 3MP camera. you need a bandwidth calculator to calculate how many IP camera at what resolution you can connect. Most embedded NVR states 4 ch, 8ch, 16ch, you cant go by that, that is just the limit of maximum IP camera you can connect at even the lowest resolution. Incoming Bandwidth is the number to go by. As FPS, resolution, quality, compression all affect the bandwidth consumption of a IP camera. Share this post Link to post Share on other sites
MaxIcon 0 Posted June 14, 2014 I haven't used one, but the manual for these lists compatible cameras and the resolution it supports: http://www.hikvision.com/en/products_show.asp?id=9042 Share this post Link to post Share on other sites
milkisbad 0 Posted June 14, 2014 Max resolution it can record should be 5 MP, 3 MP should be no problem. In the spec sheet it says Playback resolution 5mp/3mp..... How would it play back 5MP if it cannot record at 5 MP? You should be fine lol Share this post Link to post Share on other sites
littlbox 0 Posted June 20, 2014 I have bought a hikvision ds2cd2332-i ip 3mpixel ip camera ,and in the compatibility list in the manual of the hybrids dvrs 76xxhi-st ,has the specific camera with 1280x960 recording resolution. So whats going on why is this 3mp ipc is recorded only at 1.3mp? Share this post Link to post Share on other sites
