tommyis3 0 Posted June 15, 2014 The image below is from a Q-See analog HD-CVI camera, when i installed the camera the image color was great, night came the IR's came on and the night image was great, the following morning this is what the image looks like, I have two cameras doing the same thing, is this something to do with the mechanical IR Cut Filter... Share this post Link to post Share on other sites
milkisbad 0 Posted June 16, 2014 Looks like your IR filter is stuck, just force it to go into night mode and day mode again and it might come loose and work again. Cover it up with your hand to force it into night mode...if your camera has OSD you can also turn on Night mode under Day/night option. If it happens alot i would return it for replacement Share this post Link to post Share on other sites
Lingbaoangkang 0 Posted June 25, 2014 Hello everyone,i'm a new hands,looking for same experences from the forum.at first could you tell me how to set my signature?Thanks very much. Have a good day! Share this post Link to post Share on other sites
pbmb8883 0 Posted July 17, 2014 IR filter problem. As mentioned in an earlier post force it to go on and off by covering the camera with your hand and then uncovering it.... if problem persists camera needs to be replaced. Share this post Link to post Share on other sites
arya-robot 0 Posted August 8, 2014 Also you can prepare an IR CUT filter an change it yourself. Good luck Share this post Link to post Share on other sites
