mikeblades 0 Posted June 20, 2014 Morning All; We recently converted our PELCO DX8100 and Exaqvision system to the Milestone XProtect system and now i have lost the ability to control our PTZ cameras properly through Milestone. We have a mix of IP and analog cameras on encoders. The IP cameras will respond to PTZ control within Milestone (I use keyboard and mouse), but as soon as i start to swing the camera, it zooms in as far as it will go. However, if I browse to the camera through it's IP addy, I have no problem moving the camera around. I have reset the camera back to default factory settings and tried changing several settings, but to no avail. I can't do anything on any of the analog cameras on the encoders. The following is a little list of what devices i have: Pelco Spectra IV-IP TXB/HD Arecont (model unknown) Pelco IX series AXIS P3364 Fixed AXIS Q7406 Video Encoder Blade AXIS P7224 Video Encoder Blade Any advice anyone could offer would be greatly appreciated. Mike Share this post Link to post Share on other sites
ssnapier 0 Posted June 20, 2014 Are there any addressing or protocol settings that can be adjusted in Milestone? Share this post Link to post Share on other sites
