dannyboy147 0 Posted June 20, 2014 Hi Guys Im in need of your expertise. I have a Molynx VISKEYVS11 CCTV system in my workplace. I need a little help with reprogramming the unit but i have no manuals and cant find any online support. looks like the system is ancient. I have 6 CCTV cameras and everything works fine except when you select camera 1 on the control unit it shows CCTV camera 3. It does this with 3 of the 6 cameras (The CTRL unit and camera number dont correspond). I need to sort it so camera select option 1 on the control unit shows CCTV camera 1 camera select option 2 on the control unit shows CCTV camera 2 etc...... I have had a play with it and cant get it fixed. I cant mess around with it too much as im on an oil rig and the equipment is safety critical. Any help would be greatly appreciated. Feel free to ask any more questions if i havent explained the situation very well. Thank you in advance for any input. Share this post Link to post Share on other sites
tomcctv 190 Posted June 20, 2014 Hi. Check your pm and let us know if that helps Share this post Link to post Share on other sites
dannyboy147 0 Posted June 22, 2014 Hi Tom, thanks for that. I have asked for some help from them. Will let you know how I get on. Share this post Link to post Share on other sites
jazzar 0 Posted June 25, 2014 think you need to get into programming mode and map the camera title/ decription to the actual physical input channel on the visilynx controller. ie you can have physical input 1 and name it camera 6 oand physical input 2 and name it camear 8 etc. it allows you to map the cameras in the order that you want instead of having to physicaly swap all the bncs at the input of the controller. I may have a copy somewhere of the programming sequence- let me know how you go before I start trawling for it. think you need a password to get into programming menus- would you have one ? Share this post Link to post Share on other sites
