Jump to content
kalintush

Installing 1MP 8 IP Cameras with NVR

Recommended Posts

Hi All,

 

I've installed 1 Mega Pixel , 8 Cameras on a site. I've used a 10/100 DLink switch. The problem is once I've plugged 7 IP cameras to the NVR ,Images are stuck and trying to reconnect to the Cameras . Within few minutes back all are come alive . and same thing is happening.

 

What would be the problem ? Is it with the switch. I've already ordered a Gigabit DLink Switch.

 

Thanks

Share this post


Link to post
Share on other sites

NVR is ordered from china. There's no Brand. But It supports 9 Channels . Same goes with the IP Cameras . Do you need the spec ?

Share this post


Link to post
Share on other sites
NVR is ordered from china. There's no Brand. But It supports 9 Channels . Same goes with the IP Cameras . Do you need the spec ?

 

Good luck with that. I'm not wasting any more of my time on this...

Share this post


Link to post
Share on other sites

what are the settings of the cameras? 30fps? how much bandwidth is each camera producing, what are the limitations of that nvr? like how many fps does it support or bandwidth? How long are the ethernet cable runs and are you using good cat5 or 5e cabling? just somethings to start with. Otherwise as i'm sure others are thinking - you'd probably have to call that companies tech support which coming from china is probably not going to be possible or hard to get a hold of them.

also, who's 1mp cameras are they? any brand name or part numbers

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×