Bucki 0 Posted June 22, 2014 Hi Guys Sorry if posted in wrong section! I got this system "NetDVR R9508S v5.0.4 - JMS128" It does not have any logo or brand on the dvr itself. Never the less, when I purchased it, the system had ADMIN + Password preset meaning, the password was already on the login, so I logged in right away. Tho I contacted the seller on ebay and he was not sure about the password! Then I used a tool found here: http://www.hkvstar.com/product-news/forget-the-dvr-password-how-to-generate-a-new-one-with-software.html and allowed me to set my own password and the password works fine to log into the DVR THE PROBLEM Now, I wanted to set it up so I can watch it through the internet. I already set up the IP and works fine .. and the issue is that, in order to log into the DVR remotely, it asks me for the username and password. I have used ADMIN + Password that I use for DVR . and yet it does not allow me to log in. It drives me mad I also created a different user name + password - and still cant log in with that new username either. I cannot even remove the admin username at all. So I am stuck and lost of ideas. Any one can help or suggest??? MUCH APPRECIATED ps: I already tried the CMOS trick. Share this post Link to post Share on other sites