27901591 0 Posted July 2, 2014 Hi wondering if anyone can help? Im getting fuzzy lines across the screen, they're not moving up and down just in one place in the centre. * Its a pelco spectra iv with the pelco power supply * Running a 230v upto the power supply which is 1 foot away from the camera and 26v from the power supply to the camera. (originally was on 24v but i thought id up it up to see if that solves the problem) * The cable running from power supply to camera is probs 2 foot in length and is a 1.5mm lighting *ive tried two different cat5/6 cables for video feed, and also tried different baluns, currently running a solid copper cat 6e cable, only 20 meters if that from the camera to dvr any suggestions? Share this post Link to post Share on other sites
Samir 0 Posted July 4, 2014 Do you have any other cameras? If so, then swap the camera with one that is working perfectly. If the problem follows the camera, it's the camera. If the problem stays even with another camera, it's something else besides the camera. You can continue swapping pieces between things that definitely work and things you question to figure out what's wrong. Share this post Link to post Share on other sites
