akikogerm 0 Posted July 6, 2014 Hello all, we have our security cam installed in the shop and it was all working well. But yesterday when we turned on the Screen instead of showing the Picture of the cam as it used to be, there was only a blue Screen. Already unplugged all energy devices and put it in again. Also changed the cables and tried on other Screen same Problem remain. Perhaps important notice it is an US American camera System but we live here in Germany, so between cam and Screen we have an Adapter from LIGAWO which converts NTSC to PAL and that tft screeen has the right cable Connection. Since suddenly nothing worked anymore tried to Change Setting on converter, could jump between blank blue Screen to black Screen with message "out of range" - but no more camera pic Share this post Link to post Share on other sites
Numb-nuts 1 Posted July 7, 2014 (edited) Frankly you might be better off simply buying pal equipment. The convertor has a lot of work to do when a new DVR ([erhaps new cameras depending on model) aren't really that expensive and you wouldn't have this issue to resolve which frankly is a non starter and really more complicated than it needs to be. ve have vays of making it vork... hope you get it sorted... Edited July 11, 2014 by Guest Share this post Link to post Share on other sites
Samir 0 Posted July 11, 2014 If you have other cameras that require a converter like this, I would try swapping the converter for a known good one. If the picture improves, converter went bad. If the picture doesn't improve, camera went bad. And I'd just replace it with a PAL one to avoid any future problems with converters. Share this post Link to post Share on other sites
