petville 0 Posted February 1, 2006 Hello guys. I have a small baby being left with a baby-sitter during the day. I wanted to make sure she was doing the right things, so I looked into setting up a monitoring system with 2 wireless SWANN cameras and PC card also from SWANN, which supposedly would let me see the action over the Internet. After installing the card and the cameras according to the instructions, I get no image on the computer. The computer meets all the requirements. I tested the cameras connecting them directly to the TV and I do see the image. The message through the card software is Image Loss and I don't know what can be wrong nor how to fix it. I downloaded ActiveX because it was required, but I only get a sporadic image with a wired camera, not the wireless. Any help will be appreciated. Share this post Link to post Share on other sites
kandcorp 0 Posted February 1, 2006 All your drivers up to date; Video, Direct X, etc. Also, Where are you located, you may have to set your video format to NTSC or PAL according to your location. Share this post Link to post Share on other sites
kandcorp 0 Posted February 1, 2006 Also, are you accessing through your LAN or Remotely. Do you have proper ports forwarded. It looks like Port 1159 is used for the transfer of the live video stream. Is the card th PC DVR-4-Net? Share this post Link to post Share on other sites
JMANOFNVS 0 Posted February 2, 2006 My suggestion would be take the swann equipment back if possible and buy something else. If not possible what are the model #'s you are using? and distance as well as any obsticles between the cameras and receiver? Share this post Link to post Share on other sites
