No-ip setup with Hikvision NVR 7616

[rfeyer 0]

Hi all

 

second thread as newbie - HAve a pretty well working Hik NVR, but have not figured out how to input No-IP DDNS information.

The NVR asks for: Server Address

Domain

user name

password

 

If my no-ip account has a host name of somename@no-ip.biz

 

Would Somename@no-ip.biz be the server name or would it be no-ip.bi

What would Domain be?

[mgb 0]

The dvr programming should have a spot where you select from a list of ddns services and then there should be space below where you would input the ddns name

[rfeyer 0]

MGB,

 

you are correct, I found that area,

however,

It is unclear to me what to enter where (as noted in my initial post). Could you give me any insight, or anyone else?

 

I can not get the NVR allowing the viewing of live cameras, even though ports (incl 554) are forwarded corectly and I am able to view via internet into BlueIris

 

Any help would be appreciated

[shockwave199 0]

Hi all

 

second thread as newbie - HAve a pretty well working Hik NVR, but have not figured out how to input No-IP DDNS information.

The NVR asks for: Server Address

Domain

user name

password

 

If my no-ip account has a host name of somename@no-ip.biz

 

Would Somename@no-ip.biz be the server name or would it be no-ip.bi

What would Domain be?

Server address - dynupdate.no-ip.com

Domain - your custom noip address

User name and password are what you use for your account

 

Try that. That's what it says in my dahua network setup.

[rfeyer 0]

TY Shockwave,

 

I will try this!

 

By chance, Is the Dahua the same as the Hikvision? I did some research and the Sxann 8CH 3mp is exactly the same hardware and firmware