hwatsonkayak 0 Posted July 14, 2014 Hi There. I am about to install my first dome camera externally in a warehouse. Should I? - Have only the camera on the outside of the building with all the termination on the inside, drill a fairly big hole to allow for the wires of the camera through and then just plug the hole with silicone (assuming the camera wire reach through the double skinned wall? - Run the cat 5 through the wall and into a junction box, then have a short length of exposed wire between the camera and box - try and fix the camera onto the junction box so only a little bit of wiring is exposed? Some other method I haven't thought about.. Very many thanks! Share this post Link to post Share on other sites
ssnapier 0 Posted July 14, 2014 Depending on the building, you may want to fill that hole with fire stop putty and then silicone seal the outside. Share this post Link to post Share on other sites
