seasoldier 0 Posted July 21, 2014 Is it OK to power my DVR that I use for security cameras off during the day when I don't need it to run? I have been told powering it on and off will shorten the life of the DVR? Share this post Link to post Share on other sites
tomcctv 190 Posted July 21, 2014 Is it OK to power my DVR that I use for security cameras off during the day when I don't need it to run? I have been told powering it on and off will shorten the life of the DVR? No it will do not problem at all . But why would you want to switch it off Share this post Link to post Share on other sites
seasoldier 0 Posted July 21, 2014 Because during the day I am home, I only need it at night, thanks for the reply back. Share this post Link to post Share on other sites
mgb 0 Posted July 21, 2014 To make it easier for yourself so you don't have to worry to remember to turn it on, you can set it up in scheduling so that it only records at night. Share this post Link to post Share on other sites
tomcctv 190 Posted July 21, 2014 Because during the day I am home, I only need it at night, thanks for the reply back. Even being home your system can still do it's job if something happends. Is the reason because you have indoor cameras or in and outside £££ you can switch just internal cameras off Share this post Link to post Share on other sites
joseph.chen0312 0 Posted July 22, 2014 You may consider setup recording timeline, day is recording and night w/o recording then you will not see anything. Share this post Link to post Share on other sites
seasoldier 0 Posted July 22, 2014 I was just trying to save some electricity and also the DVR is quite noisy due to the cooling fan running Share this post Link to post Share on other sites
seasoldier 0 Posted July 22, 2014 To be clear I am turning the main switch off in the back of the DVR Share this post Link to post Share on other sites
seasoldier 0 Posted July 22, 2014 You may consider setup recording timeline, day is recording and night w/o recording then you will not see anything. I wish I knew how to do that Joseph Share this post Link to post Share on other sites
joseph.chen0312 0 Posted July 22, 2014 if blower is too louder you may remove it and you access main menu for check record set up. It should be allow you default periods you tend to recording. Share this post Link to post Share on other sites