TCMFILMS 0 Posted July 22, 2014 I bought a Zmodo .264 4ch dvr and had all the cams set up for a while and i finally bought a hard drive for it and now i want to go change the settings ind i seem to have forgotten the password! i have a Zmodo ZMD_DD_SBN4. I already tried the battery trick but it only reset the time. PLEASE HELP! thanks Share this post Link to post Share on other sites
Numb-nuts 1 Posted July 22, 2014 Your first port of call needs to be your original equipment supplier. However if they aren't interested, as so many of these box movers aren'r (a quick profit and to hell with aftercare) you're basically stuffed. Using the start date and serial number they will have to generate a code at the factory for you to enter into the password field which will then let you in and you should then set the password. This time write it done and place it in an envelope and retain in with your special documents like passports, birth certificates etc. Share this post Link to post Share on other sites
tomcctv 190 Posted July 23, 2014 Hi. Admin 111111 Or Admin 888888 If you can connect on your local LAN then it's admin and password is blank. If you don't have any luck then master rest has been sent to you PM. TAKES 5 minutes to do a factory reset. Share this post Link to post Share on other sites
tomcctv 190 Posted July 23, 2014 A-H It's a forum get over yourself Share this post Link to post Share on other sites
Numb-nuts 1 Posted July 26, 2014 Me and my shaaaaaadow... Share this post Link to post Share on other sites
tomcctv 190 Posted July 26, 2014 Me and my shaaaaaadow... What is the point of being your shadow .. Your best off being mine ....... Learn something ...... Then you can help on posts instead of saying get a pro in Share this post Link to post Share on other sites
Numb-nuts 1 Posted July 31, 2014 (edited) comment withdrawn......sorry Ewan, too much lubrication Edited July 31, 2014 by Guest Share this post Link to post Share on other sites
secplus 0 Posted July 31, 2014 Come on, this is not Facebook. Be professional. Share this post Link to post Share on other sites
tomcctv 190 Posted July 31, 2014 Come on, this is not Facebook. Be professional. Take it you seen his post before he edited it Problem is this is a forum ..... A place for people to get help and support ...... And I get called a AH FOR HELPING NUMB NUTS JUST LIKES TO HAVE A GO AT ANYONE THAT GIVES HELP AND if anyone reads this post from start to end ANYONE CAN SEE ITS A NORMAL STANDARD POST TURNED INTO SOMETHING ELSE BY NUMB NUTS Share this post Link to post Share on other sites
