xavier4or 0 Posted August 1, 2014 Ok, sorry I must be doing something wrong... Got my first Hikvision camera (converting from the Logitech cameras) and have plugged it into my POE switch. The 3 lights (Power, Link, Act) show it is working correctly. So I am trying to access the camera from IE using the default IP address of 192.0.0.64 but I get an error message - "this webpage is not available". Do I need to change something on my router? I can see the camera on iVMS (with the x.x.x.64 IP address, serial number, etc) but having separate issues getting iVMS work - so trying the web browser method. Any guidance on what I am doing wrong? Thanks! Share this post Link to post Share on other sites
Don Stephens 0 Posted August 1, 2014 Your IP camera needs to be configured to your network. The camera's IP needs to correspond with the IP address of your router. PC - Command Prompt - Enter ipconfig and press enter. Locate the Default Gateway (router's IP) Mac - Terminal - Enter ifconfig and press enter. Locate the Default Gateway (router's IP) If you've already done this, or when you finish this, you'll more than likely need to enable the Active X plugin in its entirety, login to the camera, and then add the camera's IP as a trusted site. Share this post Link to post Share on other sites
xavier4or 0 Posted August 2, 2014 Woohoo - I see the camera picture now! I didn't realize I had to change the IP address to my local network - and I now can see the camera via the web browser and iVMS 4200! On to getting the PCNVR or iVMS 4200 storage server working... Share this post Link to post Share on other sites
