billv 0 Posted August 11, 2014 I have a Qsee 828 system. 7 cameras outside, 1 inside. I set up Motion events for all but one camera (it's just a viewing camera), set the sensitivity to middle range and set the region to detect to prevent vegetation from triggering it. I'm getting many false motion events (63 overnight) - the photo it sends me has nothing in it that would/should have triggered the event. On the other hand when I stand in front of any of the cameras and wave my arms at it, I get no trigger. Can anyone tell me what's going on and how I can fix this? Thanks Share this post Link to post Share on other sites
mgb 0 Posted August 11, 2014 Not sure why its not recording when you move in front if the camera but the false triggers are probably dust, bugs and light changes. Emails based off of motion can be iffy because there are so many little triggers normally. Double check your settings to see why it didn't record known motion. Share this post Link to post Share on other sites