mr ngoma 0 Posted August 12, 2014 Dear Members, Kindly see attached photo, dvr not booting at all! is there any technical solution? can I upgrade firmware ? Please assists Share this post Link to post Share on other sites
tomcctv 190 Posted August 13, 2014 Hi. Open your unit and then unplug hard drive then try and reboot. If still no luck then I can send software to load Share this post Link to post Share on other sites
mrngoma 0 Posted November 20, 2014 Dear Tomcctv, Kindly send me file to load, i have no lucky after remove hdd.. Warm Regards Mr Ngoma Share this post Link to post Share on other sites
tomcctv 190 Posted November 20, 2014 Dear Tomcctv, Kindly send me file to load, i have no lucky after remove hdd.. Warm Regards Mr Ngoma Hi everything sent to your pm This is the new firmware. Extract from your PC to memory pen .... Insert pen into dvr then start dvr up At the end you will be asked to insert cd key ..... Use the serial number on back of your unit instead Share this post Link to post Share on other sites
mrngoma 0 Posted November 21, 2014 Thank you Tomcctv, I cross checked link you sent me and dvr I have is not nano type, its EH111H-4+ so can you send me recovery firmware for this? Thank you, Mr Ngoma Dear Tomcctv, Kindly send me file to load, i have no lucky after remove hdd.. Warm Regards Mr Ngoma Hi everything sent to your pm This is the new firmware. Extract from your PC to memory pen .... Insert pen into dvr then start dvr up At the end you will be asked to insert cd key ..... Use the serial number on back of your unit instead Share this post Link to post Share on other sites