akv 0 Posted August 14, 2014 i purchased 2 ipc-hfw4300s cameras. they not working out of the box. i can't connect it not from browser, configtool of software. i tried firmware upgrade but it says login failed. is anyone got the same problem and solved it? dahua's support very slow and not solved it. i see the ip address on the router 192.168.1.108 but can't connect is there a way maybe to factory reset from inside the camera? Share this post Link to post Share on other sites
akv 0 Posted August 15, 2014 maybe removing this battery will reset the settings? https://drive.google.com/file/d/0B6Uim1ox9fHcdmFWcmJxbDVkOHc/edit?usp=sharing Share this post Link to post Share on other sites
akv 0 Posted August 16, 2014 Ok, i found out what was the problem. Power cable.was too long, caused drop in the voltage. Camera is great by the way, just needed to focus it Share this post Link to post Share on other sites
pablo.schutz 0 Posted August 18, 2014 Please I need help! Where can I get Firmware for IPC-HFW4300S ??? Share this post Link to post Share on other sites
akv 0 Posted August 19, 2014 Hi I got it through dahua support. i think there are more than one version of IPC-HFW4300S so you need the specific firmware for you camera. I saw here firmwares but on your risk, that if you flash the wrong firmware, the camera might stop working without option to flash another firmware http://www.cam-it.org/index.php?topic=7457.0 Share this post Link to post Share on other sites
