Jump to content
xavier4or

Help - can't access my Hikvision camera via web anymore?

Recommended Posts

Still playing with my first HK camera and all is going pretty well...

 

But I changed the ports on my router and camera (via the web interface) and now I can't access the camera via the web interface anymore. I verified the camera internal IP address via the router and 4200 SW - and the video streaming is working fine.

 

I also tried to access the camera via IE and Chrome with 192.x.x.x:xxxx (adding the port) but no luck.

 

Any ideas on what I am doing wrong?

 

Thank you!

Share this post


Link to post
Share on other sites

Try

192.168.xxx.xxx:yy

 

yy being the port number

 

Just typing in the ip will automatically send it to port 80 but you may have changed that.

 

Edit: oops I just re-read and saw you already tried that.

You can always factory reboot and trace back your steps

Share this post


Link to post
Share on other sites

Yes, factory reset is my last resort option - I am not sure if that will remove the CBX region changer that I have applied. I guess I can always re-install it...

 

But I'm not sure what I broke so I don't do it again.

 

I went into the HK SADP program and changed the port to 8000 (and added port 8000 to my router) but that didn't help either.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×