RaySharp H.264 8CH digital Video recorder wont record

[Damienphenry 0]

Hello all... I am a newbie

Hopefully your can help me. I have a RaySharp H.264 8CH digital Video recorder.

The cameras appears live on screen but it won’t record for me, instead of an “R” I see a “H” displayed on the monitor screen. the system used to record fine, its only in the past few weeks it has stopped?

Can you advise what I can do. Also do you happen to have a user manual for this recorder, if so can you email it to me?

 

Also does anyone know where I can get the manual? seem to have misplaced mine

 

Many thanks

Damien

[MrMxyzptlk 0]

http://www.raysharp.cn/en/questiondetail-63.html

 

Here's a start. Looks to be another wonderful product brought to you by Chinese slave labor. The manual is likely translated from Chinese to Russian and then to English by a guy who learned the language from old Batman reruns. Enjoy.

[Damienphenry 0]

I actually came across that site already, its as useful as a wet paper bag...thanks away

 

Wondering If there are any other solution to my problem?

Any help greatly appreciated

 

Regards

D

[tomcctv 190]

Hi think you might have a differant raysharp

 

Avtech was also sold under that name

 

Can you post a picture of front of your dvr

[Damienphenry 0]

Hello. See attached picture... hope this helps

Regards

Damien

[VidER 0]

Are you sure it is an "H" and not an "M"? It could be set to record on motion detect rather than schedule.

[Laurence 0]

Try changing hard drive

[maxtorgr 0]

im installing raysharp for more than 3 years.

 

you need to format hard disk drive.

 

H = Hard disk warning. (damaged or unformated).

R = Recording

M = Motion detection