teknologs 0 Posted August 22, 2014 I bought the camera from china.. model: DS-2CD3Q10FD-IW p2p feature did not work ezViz... telnet 192.168.2.111 root 12345 setFtpService : enter showServer: enter # showServer Enable: 1 LBS dev.ys7.com:8555 DAS 183.136.184.7:6806 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 change lbs server: setLBS dev.ezviz7.com:8555 : ENTER set lbs server success available ezViz Share this post Link to post Share on other sites
catseyenu 0 Posted August 23, 2014 Cool, a couple of questions if I may. Why "setFtpService"? Which version of firmware are you on? FWIW, DS-2CD3XX0 v5.20 already has this enabled. Share this post Link to post Share on other sites
iTuneDVR 2 Posted August 23, 2014 teknologs Good job! It's not realy hacked, but very smartly tuned!!! setFtpService - just list the prompt! # setFtpService Commands Usage help : Printf the command usage list getIp : Get the device's IP address setIp : Set the device's IP address. Usage: setIp [IP ADDRESS]:[SUBNET MASK] e.g. setIp 192.168.1.10:255.255.255.0 setPort : Set the device's command PORT Usage: setPort [PORT NUMBER] e.g. setPort 8000 setGateway: Set the device's gateway Usage: setGateway [GATEWAY ADDRESS] e.g. setGateway 192.168.1.1 setPacketType: Set the stream packet type Usage: setPacketType [PACKET TYPE] e.g. setPacketType ps; setPacketType rtp getRtpLen : Get the main stream rtp packet length. setRtpLen : Set the main stream rtp packet length. Usage: setRtpLen [packet len]. e.g. setRtpLen 1000. setDebug : Set debug parm. e.g. setDebug -l 2 -m rtsp -d 111 setDebug -h getDebug : Get debug parm. e.g. getDebug getDebug -h debugLog : Print all debuginfo before. e.g. debugLog debugLog -h setV6ip : Set the device's IP address Usage: setIp [IP ADDRESS]/[SUBNET LEN] e.g. setIp 2000:1:2:3:4:5:6:7/64 getAgingMode : Get the aging mode. setAgingMode : Set the aging mode. Usage: setAgingMode [aging mode]. e.g. setAgingMode 1. getAgingTime : Get the aging time. setAgingTime : Set the aging time. Usage: setAgingTime [aging time]. e.g. setAgingTime 60. setIrcmd : Set the IR PWM value(0-100) Usage: setIrcmd [near] [mid] [far] e.g. setIrcmd 100 100 100 setRectFrame: Set the autotrack rectangle frame. Usage: setRectFrame [ENABLE]. e.g. setRectFrame 1. getIrstate : Get the IR PWM value(0-100) getMcuInfo : Get the information of Mcu setFtpService : Set ftp service state.(start/stop). setItsMode : Restart ITS lib after changing scene. Usage: setItsMo de [ENABLE](0/1). InquireFanSwitch: send Laser Cmd. e.g. InquireFanSwitch . StartLaser: Start Laser. CloseLaser: Close Laser. LaserMotReset: Reset Motor of Laser. EnlargeCur: Enlarge electric current of Laser. ReduceCur: Reduce electric current of Laser. SetCur: Set electric current of Laser.(0~255) e.g. SetCur 150. LaserMotDirect: Set Motor Direct of Laser.(1~36) e.g. LaserMotDirect 36. LaserTeleOffset:Tele Offset.(0~255) e.g. LaserTeleOffset 150. setLaserMode:setLaserMode (0-auto,1-mannual. e.g. setLaserMode 1. getLaserMode:Laser control mode is 0 (0-auto, 1-mannual) e.g. getLaserMode. LaserWideOffset:Wide Offset.(0~255) e.g. LaserWideOffset 150. InqSwitch: Inquiry Switch of Laser. InqCurrent: Inquiry Current of Laser. InqCurMotDirect: Inquiry Current Motor Direct of Laser. setIrMode:setIrMode (0-auto,1-mannual. e.g. setIrMode 1. getIrMode:Ir control mode is 0 (0-auto, 1-mannual) e.g. getIrMode. ******************************************************************************** *** showKey : Get all the keys of civil platform showServer : Get all the servers of civil platform showUpnp : Get the local and nat port and address showStatus : Get the device status of civil platform showDefence : Get the defence plan setLBS : set the lbs address, e.g. setLBS 123.1.1.1 or set dev.ys7.com:8555 setAlarm : set the alarmserver address. Usage as setLBS setWlan: : set the wifi ssid, just for test config. Usage: setWlan SSID setdefence : Set the defence plan Usage: setDefence [enable:1] [day:*] [start:hh:mm] [end:hh:mm] e.g. setDefence enable:1 day:3 start:7:30 end:13:0 ******************************************************************************** *** In 5.2.0 #setLBS dev.ezviz7.com:8555 # showServer Enable: 1 LBS dev.ezviz7.com:8555 DAS 107.21.63.234:6801 MSG invalid NTP 210.72.145.44:123 ALARM invalid STUN_1 stun1.ezviz7.com:6003 STUN_2 stun2.ezviz7.com:6004 In 5.1.6 after tined setLBS # showServer LBS dev.ezviz7.com:8555 DAS invalid MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 invalid STUN_2 invalid I tried to configure this in 5.1.6 and 5.2.0. But only 5.2.0 is a menu with EZVIZ. Probably will have to force to resolve it in 5.1.6, to display a menu, and perhaps in others too it works. Share this post Link to post Share on other sites
iTuneDVR 2 Posted August 23, 2014 By the way! In the European version of the IPC on the menu one, and in the Chinese version of the IPC, a little more! Share this post Link to post Share on other sites
iTuneDVR 2 Posted August 23, 2014 In original chinese version on the same IPC # showServer Enable: 1 LBS dev.ys7.com:8555 DAS 183.136.184.7:6805 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 After # setLBS dev.ezviz7.com:8555 set lbs server success # showServer Enable: 1 LBS dev.ezviz7.com:8555 DAS 183.136.184.7:6805 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 # showServer Enable: 1 LBS dev.ezviz7.com:8555 DAS 107.21.63.234:6801 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 # Share this post Link to post Share on other sites
catseyenu 0 Posted August 23, 2014 Any clue what "LBS" & "DAS" stand for? Location Based Services? Share this post Link to post Share on other sites
catseyenu 0 Posted August 23, 2014 Security Cam Maker Dropcam Announces A Location-Based Motion Sensor http://techcrunch.com/2014/05/06/security-cam-maker-dropcam-announces-a-location-based-motion-sensor/ Share this post Link to post Share on other sites
sersh3230 0 Posted August 26, 2014 I bought the camera from china.. model: DS-2CD3Q10FD-IW p2p feature did not work ezViz... telnet 192.168.2.111 root 12345 i have the chinese version hikvizion C2/ when i dial my password (root/12345), it doesn't match. can you please tell me the login and password info? Share this post Link to post Share on other sites
catseyenu 0 Posted August 26, 2014 Default is admin/12345 Share this post Link to post Share on other sites
sersh3230 0 Posted August 26, 2014 Default is admin/12345 too incorrect Share this post Link to post Share on other sites
sersh3230 0 Posted August 26, 2014 Default is admin/12345 model: CS-C2-21WPRF admin/12345 - too incorrect Share this post Link to post Share on other sites
catseyenu 0 Posted August 26, 2014 Have you changed the login on the camera from it's defaults? Share this post Link to post Share on other sites
iTuneDVR 2 Posted August 26, 2014 model: CS-C2-21WPRF admin/12345 - too incorrect It's new IPC from Hikvision? What's firmware version? Screenshot better! Share this post Link to post Share on other sites
vinzip 0 Posted August 27, 2014 Hi, I tried to set my DS-2CD2032-I with 5.1.6, but the p2p cloud isn't enabled. How I can enable it? I've set the LBS server... # showServer LBS dev.ezviz7.com:8555 DAS invalid MSG invalid NTP 210.72.145.44:123 ALARM alarm.hik-online.com:7200 STUN_1 invalid STUN_2 invalid Please help me... Share this post Link to post Share on other sites
iTuneDVR 2 Posted August 28, 2014 Hi, I tried to set my DS-2CD2032-I with 5.1.6, but the p2p cloud isn't enabled.How I can enable it? I've set the LBS server... # showServer LBS dev.ezviz7.com:8555 DAS invalid MSG invalid NTP 210.72.145.44:123 ALARM alarm.hik-online.com:7200 STUN_1 invalid STUN_2 invalid Please help me... I tried to configure this in 5.1.6 and 5.2.0. But only 5.2.0 is a menu with EZVIZ. Probably will have to force to resolve it in 5.1.6, to display a menu, and perhaps in others too it works. I tried to configure this in 5.1.6 and 5.2.0. But only 5.2.0 is a menu with EZVIZ. Probably will have to force to resolve it in 5.1.6, to display a menu, and perhaps in others too it works. You do not carefully read the upper posts! Only works in 5.2.0. In 5.1.6 it is necessary to study in detail the issue. Share this post Link to post Share on other sites
vinzip 0 Posted August 28, 2014 Ok, EZVIZ isn't avaible in all 5.1.6 cameras (CH-US and EU versions)? My Cam is chinese with english menu and if I update the firmware it will be in chinese... I would mantain english menus Share this post Link to post Share on other sites
catseyenu 0 Posted August 28, 2014 Ok, EZVIZ isn't avaible in all 5.1.6 cameras (CH-US and EU versions)? In 5.16 you would have to also enable the menus as they don't display until 5.20. I have no idea how this is done but the API calls (ISAPI Image Service manual located on the disc) may give a clue. Share this post Link to post Share on other sites
sunren 0 Posted September 26, 2014 I bought the camera from china.. model: DS-2CD3Q10FD-IW p2p feature did not work ezViz... telnet 192.168.2.111 root 12345 setFtpService : enter showServer: enter # showServer Enable: 1 LBS dev.ys7.com:8555 DAS 183.136.184.7:6806 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 change lbs server: setLBS dev.ezviz7.com:8555 : ENTER set lbs server success available ezViz after rebooting the device, setting lbs server is reset to dev.ys7.com:8555, p2p feature did not work ezViz ... how to set up ezviz? model: DS-2CD3Q10FD-IW Share this post Link to post Share on other sites
sunren 0 Posted September 26, 2014 Default is admin/12345 model: CS-C2-21WPRF admin/12345 - too incorrect i have the chinese version Ezviz (hikvision) C2/ when i dial my password (admin/12345), it doesn't match. can you please tell me the login and password info? Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 26, 2014 after rebooting the device, setting lbs server is reset to dev.ys7.com:8555, p2p feature did not work ezViz ... how to set up ezviz? model: DS-2CD3Q10FD-IW Before rebooting setLBS dev.ezviz7.com:8555 : ENTER It's work??? Share this post Link to post Share on other sites
sunren 0 Posted September 26, 2014 (edited) Before rebooting setLBS dev.ezviz7.com:8555 : ENTER It's work??? what I'm doing: # showServer Enable: 1 LBS dev.ys7.com:8555 DAS 183.136.184.7:6817 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 invalid STUN_2 invalid setLBS dev.ezviz7.com:8555 : ENTER # showServer Enable: 1 LBS dev.ezviz7.com:8555 DAS 107.21.63.234:6801 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 ezviz is working properly After rebooting - ezviz not working # showServer Enable: 1 LBS dev.ys7.com:8555 DAS 183.136.184.7:6817 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 invalid STUN_2 invalid Edited September 26, 2014 by Guest Share this post Link to post Share on other sites
Digiscan 0 Posted September 26, 2014 There seems little information about ezviz. I understand this is basically a security wrapper to access hikvision cameras as opposed to a VPN. Do OEM, non-Hikvision branded cameras work with this? I ask because I see on the website for setup it wants a camera serial number or something and I am wondering if a non-Hikvision brand will work. I am guessing no (?). Does it work with any 5.2.0 hikvision camera, or just a couple of their indoor ones? Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 26, 2014 In the Chinese IPC version is selected dev.ys7.com, and in the European dev.ezviz7.com. I saw this in the code davinci. Firmware 5.2.0 is multilanguage and for a series of IPC is quite different than the raptor 2XX2 or 3XX2. A patch for this series and other Chinese equipment variants DS-2CD1XXX DS-2CD2XX0, has already been made and already rebuilt custom firmware. These firmware 5.2.0 - Multilanguage. The only thing that confuses me a little, so a processor of the IPC HI3518 !!! Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 26, 2014 In the Chinese IPC series DS-2CD3XX0 is selected dev.ys7.com, and in the European dev.ezviz7.com. I saw this in the code davinci. Firmware 5.2.0 is multilanguage and for a series of IPC is quite different than the raptor 2XX2 or 3XX2. A patch for this series and other Chinese equipment variants DS-2CD1XXX DS-2CD2XX0, has already been made and already rebuilt custom firmware. The only thing that confuses me a little, so a processor of the IPC HI3518 !!! Share this post Link to post Share on other sites
bluenetworks 0 Posted September 27, 2014 You can easily solve the issue of the "wrong" server domain by doing this at the DNS Level.. I am not sure of the capability of a consumer based router, I have done this in PFSense.. This works great on all my cameras but one... And the issue is unrelated to the server but to the "Key" The Challenge code / permanent code are both blank.. this should have "ABCDEF" in order to connect with ezviz. Anyone know what's wrong? # showKey challenge code: operation code: 32xxxxxe-4xx4-1xx4-xx00-e4dxxxxxxdc authorization code: 4db0xxxxxxxxxxxxxxxxxxxxxxxxx2a0 command key: 5f1ffxxxxxxe450d permanent code(disable): # date Sat Sep 27 15:23:16 UTC 2014 # # showStatus device type long: DS-2CD2132-Ixxxxxxxxxxxxxxxxxxxxxxxxxx device type: DS-2CD2132-I device type display: DS-2CD2132-I Registered : yes last register time: Sat Sep 27 14:40:17 2014 protocol version: 1.7 Share this post Link to post Share on other sites
