atlantis2267 0 Posted October 6, 2014 I have a China local set Hikvision 3332 (bought in China without any firmware changes). Firmware is 5.2. This sits behind a Hikvision DS-7104N-SN/P (PoE) I can't register an account on China ezviz as it requires a local mobile no. So I guess I must use the European one. I can see there is a command to set LBS and Alarm, but what do I do with the DAS invalid state? # showServer Enable: 1 LBS dev.ys7.com:8555 DAS invalid MSG invalid NTP 210.72.145.44:123 ALARM invalid STUN_1 invalid STUN_2 invalid Share this post Link to post Share on other sites
Thud 0 Posted January 5, 2015 I have a ds-cd3132 was chinese model english interface. Like an idiot I flashed it to 5.2 CHINESE INTERFACE. Found 5.2 english which fixed it though. So now I have international 5.2 and it does show up in ezviz but ABCDEF Verification code doesn't work. any ideas? Share this post Link to post Share on other sites
buellwinkle 0 Posted January 11, 2015 I have the latest DS-2CD3Q10FD-IW from China and it's all Chinese, has v2.3 firmware. Anyone been able to hack this one. The IEFile.tar.gz in a cramfs read only file system. I can change it temporarily to English by changing /home/doc/script/login.js, commenting out the line with the word "remove" in it, but no easy way to change it permanently. Share this post Link to post Share on other sites
iTuneDVR 2 Posted January 12, 2015 In fact, it's simple. One has only to want to do this! Share this post Link to post Share on other sites
iTuneDVR 2 Posted January 12, 2015 For example DS-2CD3410FD-IW http://www.hikvision.msk.ru/forum/4-2844-14248-16-1413112678 All other is the same for 1XX0, 2XX0,3XX0. Personal customized firmware 5.1.7, 5,2,0, 5,2,3, ........ Share this post Link to post Share on other sites
buellwinkle 0 Posted January 13, 2015 I see you got as far as me, changing the login.js file to allow English/Chinese option until you reboot. They seem to sell English version of this camera, but not sure if it's English hacked firmware or actual English. Do you have one? Share this post Link to post Share on other sites
iTuneDVR 2 Posted January 13, 2015 I see you got as far as me, changing the login.js file to allow English/Chinese option until you reboot. They seem to sell English version of this camera, but not sure if it's English hacked firmware or actual English. Do you have one? I make a custom firmware file, which is updated IPC. But i dow't change login.js script. It's for chiken After update my firmware file Chinese IPC is stand purely European Share this post Link to post Share on other sites
uid65252 0 Posted January 31, 2015 .....The Challenge code / permanent code are both blank.. this should have "ABCDEF" in order to connect with ezviz. Anyone know what's wrong? # showKey challenge code: operation code: 32xxxxxe-4xx4-1xx4-xx00-e4dxxxxxxdc authorization code: 4db0xxxxxxxxxxxxxxxxxxxxxxxxx2a0 command key: 5f1ffxxxxxxe450d permanent code(disable): ....... How to find Device verification code for EZVIZ on my cameras DS-2CD2032-I Firmware Version V5.2.0 build 140721 I could find the device verification code as follows: login to camera with a browser go to Advanced Configuration /System / Maintenance / Export Config.File save config file go to Advanced Configuration /System / Maintenance / Default Restore all parameters to default settings. open program SADP, modify network parameters to IP of local network open kamera in browser, login with admin/12345 goto Configuration / Security / Security Service enable Telnet login Camera with Putty user:admin PW:12345 input # showKey one can see: challenge code, which is the device verification code for EZVIZ after i imported my config file, challenge code is no longer visible with showKey but it is operational Share this post Link to post Share on other sites
kidd 0 Posted February 1, 2015 I see you got as far as me, changing the login.js file to allow English/Chinese option until you reboot. They seem to sell English version of this camera, but not sure if it's English hacked firmware or actual English. Do you have one? I make a custom firmware file, which is updated IPC. But i dow't change login.js script. It's for chiken After update my firmware file Chinese IPC is stand purely European Dude, how did you do that？ why not share with us? Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 1, 2015 Dude, how did you do that？ why not share with us? Share It? Why? How Come? Am I obliged to someone? You knew that you bought initially Chinese technique in Chinese lang. For myself, I decided this question and screenshots showing that it actually do. Others do it yourself Share this post Link to post Share on other sites
k_nikolas 0 Posted July 18, 2015 hi all the information sent was very helpful but i have issue for one point. i have changed the LBS server but how we can save the LBS server on the camera because each time you reboot the LBS server returns to the dev.y7s. is there any solution for these point? regards Share this post Link to post Share on other sites
tranceinsane 0 Posted December 4, 2016 Hi to all, I have bought this camera DS-2CD3345-I with the firmware V5.4.20 build 160726. The problem is Ezviz. It finds the camera on the LAN but when connecting it says "The device cannot be added". I saw some posts saying to telnet the camera and change the ezviz IP, but for this I have to enable Telnet in the camera. The problem is that the telnet option is not available in this firmware. How to check/telnet this camera? Any suggestion? Share this post Link to post Share on other sites
andyyyy 0 Posted January 17, 2017 Hi all, i have the same problem here !! I have 2 DS-2CD2135-IWS and the is no way to use EZVIZ. Does anyone know how to fix ? Andy Share this post Link to post Share on other sites
tomcctv 190 Posted January 17, 2017 Hi to all, I have bought this camera DS-2CD3345-I with the firmware V5.4.20 build 160726. The problem is Ezviz. It finds the camera on the LAN but when connecting it says "The device cannot be added". I saw some posts saying to telnet the camera and change the ezviz IP, but for this I have to enable Telnet in the camera. The problem is that the telnet option is not available in this firmware. How to check/telnet this camera? Any suggestion? Hi new hik don't have telnet access. Why use ezviz ?? Why put your cameras out to 3rd party. Share this post Link to post Share on other sites
tomcctv 190 Posted January 17, 2017 Hi all,i have the same problem here !! I have 2 DS-2CD2135-IWS and the is no way to use EZVIZ. Does anyone know how to fix ? Andy Why do you need ezviz ?? Why put your cameras o a 3rd party. Share this post Link to post Share on other sites
andyyyy 0 Posted January 18, 2017 Hi all,i have the same problem here !! I have 2 DS-2CD2135-IWS and the is no way to use EZVIZ. Does anyone know how to fix ? Andy Why do you need ezviz ?? Why put your cameras o a 3rd party. Because my cam is behind a 4G-LTE-Router. There is a NAT Network, and the router does not get a public IP !! Andyyyy Share this post Link to post Share on other sites
tomcctv 190 Posted January 18, 2017 Hi. Have you talked to your sim provider .... Some do static Look at a DDNS service. Anything is better than connecting to a server in China Share this post Link to post Share on other sites
FreddyPL 0 Posted February 2, 2023 Hi, did You know how to hack EZVIZ C3X camera? It's register to old user Share this post Link to post Share on other sites
