Jump to content
olds403

Aviligon 4.12 to 5.2.2 - Tips and Tricks

Recommended Posts

Upgraded my cameras and the legacy 4.12 does support them all. Any tips / tricks before I bring down the entire system and start over ?

I am running 4 cameras. Two are Axis 3367 and two Hikvison ds-2cd2732f-is. The problem I am trying to fix is have the Hikvisions send the motion alerts. The 4.12 version does not support this Hikvison camera ds-2cd2732f-is. Thus, the reason for the upgrade. I have the license files for the Aviligon and hoping this is smooth as these cams are at a salvage yard and can't keep the system down for long. thanks in advance.

Share this post


Link to post
Share on other sites

Your hikvision will work fine. I have 6 of them. You just need to make sure you have the onvif firmware or newer.

If you have 5.1.0 you need the 140217 build.

Share this post


Link to post
Share on other sites

What version of avigilon are you using ? I am still on 4 series of the vms software. If I don't have to upgrade to Acc 5.0 it would be much better for me as I have a lot of files and recordings

Share this post


Link to post
Share on other sites
What version of avigilon are you using ? I am still on 4 series of the vms software. If I don't have to upgrade to Acc 5.0 it would be much better for me as I have a lot of files and recordings

You will not loose

ACC 5 will upgrade ACC 4 database

Share this post


Link to post
Share on other sites

What firmware needs to be in ds-2cd2732f-is to make ACC4 provide the motion recording in the setup screen?

 

I made the mistake of loading Hikvision 5.20 FW from the Europe site that was supposed to be English and now my camera menus are in Chinese. Things just got worse. Acc4 still not seeing the motion menus....ugh!

Share this post


Link to post
Share on other sites
What firmware needs to be in ds-2cd2732f-is to make ACC4 provide the motion recording in the setup screen?

 

I made the mistake of loading Hikvision 5.20 FW from the Europe site that was supposed to be English and now my camera menus are in Chinese. Things just got worse. Acc4 still not seeing the motion menus....ugh!

 

You don't see the motion menu from acc, even in acc 5.

You have to set motion on the camera and it will be detected in the playback.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×