simonpeter2 0 Posted September 9, 2014 I have a bizarre situation on my 8 channel Swann system. I have 6 cameras hooked up, all was working fine, then one morning two of the signals say video loss, but not on a black screen as usual, is says video loss over top of a live black and white (like its in night mode) feed, I can see the feed is live, but its black and white now with the video loss message over top, plus those 2 cameras are now no longer recording the feed to the dvr but the other four still are. Tried searching but found only black screen video loss references ... Any ideas would help, tried rebooting system but didn't help .. Share this post Link to post Share on other sites
VidER 0 Posted September 9, 2014 Are the 2 cameras affected both fed of the same power supply? Share this post Link to post Share on other sites
simonpeter2 0 Posted September 9, 2014 Same power supply?... sort of but not really, the cameras do not have individual power supplys, each cameras power is cable fed by main power from dvr. Share this post Link to post Share on other sites
VidER 0 Posted September 10, 2014 Are the 2 cameras in question further away than the others? i.e Do they have a longer cable run? Share this post Link to post Share on other sites
simonpeter2 0 Posted September 14, 2014 No, cable runs are all about the same, but those 2 cameras have been working fine for about 6 months, then one morning both started with the strange symptoms ... Share this post Link to post Share on other sites
