Michael1267 0 Posted September 11, 2014 Hello, i been searching for a solution in the forum but havent found a solution for my dvr, this is the dvr tried solution using telnet root pwd xc3511 but says pwd incorrect Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 11, 2014 Make login screenshot Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 11, 2014 Why is the picture smeared, you shake hands? Need fullscreenshot with date!!! It's seem to me Dahua. Try on 2014-09-11 318768 Share this post Link to post Share on other sites
Michael1267 0 Posted September 11, 2014 Hi, thanks for the answer, i wasnt shaking!! haha, hard to take pic on cellphone, the date is at 11/30/2000 since i removed the battery to check if it could reset to factory, isnt dahua, the brand is "tecnomatic" but i think is a generic standalone with company names on it as is the exactly same dvr as the first pic i posted, here is the dvr information i found when installing the dvr 2 months ago, exact same manual as the on came in the box as the software for the PC, http://www.doss.com.au/rpdvr-series-h-264-d1-recording-network-dvr/ it also includes the firmware, its there a way to put the firmware without admin pwd? here is other clear SS of the login including the date Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 11, 2014 Link to firmware! Strange date 2000-11-30! Try 000000 Only digits or character to . Click [123] try wKNR4S at this date! Share this post Link to post Share on other sites
Michael1267 0 Posted September 11, 2014 Tried original pwd that it was 123456, also 000000, also clear pwd; yes has characters(with and without caps) too and special chars aswell, link to firmware its on the link i post, need to scroll down to a box with 4 red tabs, last one is the firmware one Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 11, 2014 Set by the DVR on the Internet and share it with full access! Share this post Link to post Share on other sites
Michael1267 0 Posted September 11, 2014 how to do that? Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 11, 2014 how to do that? Simple! Connect your DVR to internet and on your router set IP DVR to DMZ! Share this post Link to post Share on other sites
Michael1267 0 Posted September 11, 2014 well i can log on it via telnet, its already on the network with a static IP, i put on login: root, but the password idk what to put, tried xc3511 and something like vizx and no luck Share this post Link to post Share on other sites
iTuneDVR 2 Posted September 11, 2014 well i can log on it via telnet, its already on the network with a static IP, i put on login: root, but the password idk what to put, tried xc3511 and something like vizx and no luck Connect your DVR to internet and on your router set IP DVR to DMZ! I'm lucky Share this post Link to post Share on other sites
Tiger27 0 Posted February 3, 2015 Hey Here's the doss website link I'd email them or call em and maybe they can help. http://www.doss.com.au/category/allproducts/sec-and-int/dvrs/ Share this post Link to post Share on other sites
