Jump to content
iTuneDVR

Chinese NVR 7108SN/P - research, tune & upgrade

Recommended Posts

The Beginning!

http://vk.com/album221982133_196353863

http://vk.com/album221982133_199899067

 

Continued..

 

So came the firmware update 3.0.7 for the NVR but with one Correction.

Firmware that came into my hands only for European counterpart !!!

But everything is decided and the firmware is updated.

Many changes both pleasant and not so!

 

Standard firmware multilingual (17 languages​​), and the first surprise - this is not Russian. There are Polish, Bulgarian, etc. ... and our no !!!

Website in English!

 

By total number of manipulations assembled custom firmware which added Russian language rather than Polish.

Likely to make a few options including a purely Russian.

In the web interface, while the English, but tomorrow will bring order there!

 

Another surprise was that the Web component is now stretches from the Internet http://download.hiddns.com/download/nvrie/std/WebComponents.exe

 

And here is the trouble faced by!

Unfortunately, the web interface does not play that archive Playback !!!

Thus normally responds to the selected channel, and understands that the archive is. But when you press the Play button or clicking on the colored stripes give a little hitch and a warning message "Playback failed".

 

In this case, at the NVR everything is fine, and even better than it was in 2.3.6. There are changes and improvements!

Also works perfectly playback utility ClientDemoEn.exe and iVMS4200

 

General impressions so far are good!

 

small photo report

http://vk.com/album221982133_202282913

201311081008272141.JPG.493e6a5d0b51e96a2873a6666f672982.JPG

Share this post


Link to post
Share on other sites

Organized access to cameras connected through ports on POE NVR DS-7108SN / P. In the updated, but the original firmware 3.0.7 NVR no such mechanism as a virtual port!

For example forwarded flows on external ports on the internal address of the camera 192.168.254.2, connected to the first port POE

10080 -> 80

10554 -> 554

18000 -> 8000

18200 -> 8200

And so on such a scenario for the other cameras on the POE ports

 

The original article in http://itunedvr.ru/forum/phpBB3/viewtopic.php?f=31&t=321&p=589#p589

2.thumb.JPG.d62a0ec8d2b08ae185d9be8e55c308b1.JPG

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×